H3lix Jailbreak (Supports iOS 10.3 - iOS 10.3.4)

H3lix jailbreak

h3lix is the only semi untethered jailbreak tool released for 32 bit iOS devices running on iOS 10.0.1 - 10.3.4. This was released by tihmstar in last December and it is reported that another developer, BSparkes who has not been satisfied only with this 32bit supported jailbreak is working on releasing a 64 bit.

H3lix Jailbreak Supported iOS Versions

H3lix jailbreak supports 32-bit devices running any version of iOS 10.

Supported Versions Unsupported Versions
iOS 10.3.0, iOS 10.3.1, iOS 10.3.2, iOS 10.3.3, 10.3.4
iOS 10.2.0, iOS 10.2.1
iOS 10.1.0, iOS 10.1.1
iOS 10.0.0, iOS 10.0.1, iOS 10.0.2, iOS 10.0.3

H3lix Jailbreak Supported Device

Supported iPhone Devices Supported iPad Devices
iPhone 5c iPad 4
iPhone 5 iPad 3
iPhone 4s iPad 2
iPad mini 1

If you cannot find your device in the supported devices list, make sure to visit out jailbreak tools page and find out the jailbreak tools for your device for free.

Installation process


You can use one of the following ways to jailbreak your iOS 10.0.1 - iOS 10.3.3 devices using H3lix Jailbreak.

Step by Step Guide of H3lix Jailbreak - via TaigOne

This Method is the easiest method to install H3lix Jailbreak. No Expires in 7 days.

Step 1:Download and Install the TaigOne

1. First visit TaigOne Jailbreak page by your iPhone or iPad with Safari browser and Download TaigOne.

2. Install the TaigOne.
Step 2:Lanuch TaigOne

Open TaigOne app from the Home screen.

Step 3:Explore the Jailbreak Tab

1. Find the Helix on the jailbreak tab. (make sure your device is compatible with Helix tool)

2. Click on the Install Button. This will take few time to download and install Helix. (Network Required.)


Step 4:Run Helix

1. Open Helix app from the Home screen.

2. Click Jailbreak button to start the jailbreak process.

Step 5:Completing Jailbreak Process

1. the device will respring and you should have Cydia on the Home screen of your device.

2. Congratulations your iDevice has jailbroken!

Step by Step Guide of H3lix Jailbreak - Via H3lix Official Site (With a Computer)

Step 1:Download the Helix and Cydia Impactor

* Download H3lix from https://h3lix.tihmstar.net/ (official site).
* Download Cydia Impactor from http://www.cydiaimpactor.com/ (official site)

Step 2:Install Helix using Cydia Impactor

1. Connect your iPhone or iPad to the computer with the Lightning cable.

2. Launch Cydia Impactor. It will detect your iOS device.

3. Drag the Helix jailbreak IPA file you have downloaded earlier into the Cydia Impactor.

4. Enter the Apple ID and one time password for your Apple Developer account when prompted.

5.Wait until the signed Helix app appears on the iDevice.

Step 3:Trust Develper profile

1. Once Helix jailbreak is successfully installed in your device.

2. Open the Settings.

3. Navigate to Settings > General > Profile(s) & Device Management.

4. Click on the H3lix jailbreak profile.

5. Click on Trust and confirm it.

Step 4:Run Helix

1. Open Helix app from the Home screen.

2. Click Jailbreak button to start the jailbreak process.

Step 5:Completing Jailbreak Process

1. the device will respring and you should have Cydia on the Home screen of your device.

2. Congratulations your iDevice has jailbroken!

Important

This is only for 32 bit devices and will not be working on iOS 64 bit devices.

Download only from the trusted parties as mirror sites will include malware.

Jailbreak via h3lix is not permanent as it is semi untethered in nature. So that you will have to jailbreak again after every time of rebooting your device.


iOS 10.3.3 Jailbreak

The most awaited jailbreak tool for 10.3. Finally saw its light of birth for jailbreaking. It’s h3lix by Tihmstar. To find out more visit iOS 10.3 jailbreak page.

Related Articles and Links